Use These Maintenance Tips to Help Keep Your Air Conditioning Unit Running Efficiently

Guirguis Faltaos - 6/15/2023


Most homes are heated and cooled through a central, whole-home, Heating, Ventilating, and Air-Conditioning system (HVAC). The HVAC may well be one of the most expensive and energy hungry systems in the home, so the more you know about your HVAC, the better. A well-informed homeowner will save money and have a healthier, more comfortable home.

HVAC System Components

Central HVAC systems are often called “split” systems because some of the components are installed inside the home and some of the components are installed outside a home. Inside your home, usually installed in the basement, attic, or a closet, you’ll find the furnace (oil, gas, or electric) and the evaporator portion of the air-conditioner. You’ll also find the blower (sometimes called an air handler), which serves both the furnace and the air-conditioner. Attached to the blower are ducts, which are tubes acting as pathways to deliver heated or cooled air to various rooms in the house.

Heating

If Your HVAC System is a Heat Pump

It won’t have a separate furnace. Dave Moody, an HVAC industry pro with Service Experts, explains, “A heat pump works like a regular air-conditioner in the summer, then essentially works in reverse in the winter, serving both cooling and heating purposes.” A heat-pump system will still have indoor and outdoor components.

Outside the house you’ll find the compressor and condenser components of the central air-conditioner (or heat pump), which are mounted in a metal cabinet with a large fan.

One alternative to a split-system is called a “packaged” system, in which all components are installed in a single unit outside the home, with ducts entering through the wall of the home. These units may be preferable for a homeowner who doesn’t want to waste space on the interior of their home with heating and cooling equipment.

Not often addressed in most HVAC installations is the “V” – ventilation. Most homes rely on infiltration, or air that seeps in through gaps and cracks in the home’s shell, for limited fresh air. Service Experts’ Moody says, “As indoor air quality (IAQ) is increasingly implicated as a big factor in human health problems, mechanical ventilation systems are becoming more commonplace.” More about that in the “ventilation” section below.

Cooling

Cooling is achieved via the electric air-conditioner (or cooling cycle of the heat pump). Refrigerant gas (more commonly known by the trade name, Freon) is compressed by a compressor into a high pressure gas. The compressor pumps the high pressure gas through a radiator-like condenser coil of copper (or sometimes aluminum) tubing and aluminum fins where a large fan transfers heat to the outdoors. This is all accomplished in the outdoor component of your air-conditioning equipment. Next, the cooled, compressed, refrigerant liquid is pumped into the house via the copper tubing, arriving at the also radiator-like evaporator coil. There, under less pressure, it vaporizes from a liquid to a gas once again. A natural property of this change from liquid to gas is that the refrigerant absorbs heat rapidly from the air being blown through the evaporator by the blower. The cooled air is circulated through the home via the ducts. The refrigerant gas then heads back outside to the compressor, where the cycle starts over again.

Part of our discomfort in the summer comes from high humidity in the air which makes us feel sticky or clammy. So, at the same time the air in your home is being cooled by your air-conditioner, it’s also being dried. The blower draws warm, humid air from the home through return ducts and across the evaporator. Humidity from the warm, moist air condenses on the cool evaporator coil as liquid water, dripping into a drain pan below. The air leaving the evaporator is then not only cooler, but drier. That’s why we call it “air-conditioning” and not just “air-cooling.”

Ventilation

According to the EPA, indoor air is five times more contaminated than outdoor air. As a society, we’re spending more and more time indoors – as much as 90% of our time, by some estimates. That’s why indoor air quality (IAQ) is being implicated in health problems from asthma to cancer. An air filter can filter out large particles, but fumes from cleaning products, paints, furniture, and other sources can off-gas volatile organic compounds (VOCs) which can negatively affect our health. These are more difficult to filter from indoor air, so they should be vented to the outdoors.

Increasingly, mechanical ventilation is being integrated into the HVAC system to remove stale air from inside a home and bring in fresh air from outdoors. This can be as simple as a set of ducts with fans on timers which exhaust stale indoor air and bring in fresh outdoor air.

A system like that, however, wastes energy. That’s why many newer homes and remodels are employing Heat Recovery Ventilators (HRVs) and Energy Recovery Ventilators (ERVs). These appliances attach to the existing duct system and add an exhaust duct and a supply duct to the outdoors. Then, the units exhaust stale air from the home and bring in fresh air from outside the home, but pass both air streams through an energy recovery medium which extracts the heating or cooling energy in the outgoing stale air. That energy is then passed into the incoming fresh air stream, reducing energy loss by up to 95% while still providing fresh air. Many mechanical ventilation units also include air filters to remove dust and allergens from incoming air.


See all articles →